Vinegar is a type of acid-based solution and is prepared by the process of fermentation. You could use a lot of products to ferment and make vinegar out of it. The vinegar could be of two types, alcoholic and non-alcoholic.
You wouldn’t have probably loved the taste of noodles if it didn’t have the tangy flavor and soreness in it. Vinegar is the main reason behind the enhanced flavor of everyone’s favorite dish, noodles.
The ingredients used to prepare vinegar mostly contain ethanol as an element in it along with natural sugar. When yeast is added to these ingredients, the sugar present in it would get converted into alcohol. There are different kinds of vinegar and white vinegar is one of the most commonly found. This is the type of vinegar that is used for cleaning homes. A large amount of acetic acid or ethanol is present in white vinegar.
What should you remember before using vinegar on tiled surfaces?
There are certain things you need to keep in mind before using vinegar to clean the tiled or porcelain surfaces.
- You need to use vinegar in small quantities. You should not use the concentrated form of vinegar to clean the tiled surfaces. You need to mix vinegar along with water and then use it to clean the floors.
- You should not be using vinegar on the stone surfaces; especially the natural Stone like marble cannot take the brunt of acidity in the vinegar.
- You should not soak the vinegar solution in the tiled surfaces for too long as it could lead to wearing away of the shininess in the tiles
- Also, there are chances of some burnt surfaces appearing on the tiles.
- You should not mix vinegar along with bleach.
- You can keep the windows open and ventilate the entire space if you feel suffocated by the smell of vinegar.
Steps to clean tiled surfaces using vinegar and dish soap
These are the steps you need to follow to clean the tile surfaces using a combination of vinegar and dish soap.
What are all the things needed for the vinegar and dish soap combination?
These are the things you need for the vinegar and dish soap combination to clean the tiled surfaces.
- Spray bottle
- Mop, microfiber mops are preferred
- Soft-bristled brush
- White vinegar
- Bucket to carry water
These are the instructions you need to follow to clean the tiled surfaces.
- You need to first fill the bucket with water
- You could either fill half the bucket or 3/4th of the bucket
- It is not recommended to fill the bucket to the brim as it would spill all over when you immerse the mop into it.
- You could use warm water for cleaning.
- Take the spray bottle. Use the combination of two tablespoons of dish soap along with one cup of vinegar. Mix this combination with some water fills it in the spray bottle.
- You need to spray on the hard stains on the tiled surface using the mixture in the spray bottle
- Immerse the mop in the bucket filled with water and scrub through the entire stained surface.
- Once you have mopped the entire surface, you could take the soft bristle toothbrush and spray some amount of dish soap and vinegar combination onto it from the spray bottle and brush it nicely on the spot areas and on areas where the stains are tightly stuck.
- Mop again to scrub all over the surface.
- Now wash off the entire tiled surface with clean water.
Why vinegar is used to clean the tiled surfaces?
Vinegar is naturally derived, non-toxic in nature, helps in deodorization and disinfection. It cleans some of the hardest stains and surfaces with much ease. You need not pour any rough disinfectant which in turn gives out harsh fumes. The heavily soiled tiled floors can be cleaned effortlessly when you use white vinegar on them. It dissolves grease-like stains to the maximum extent, their deodorization process occurs after the vinegar gets dried on the floor.
You could also enhance the deodorization factor by adding few drops of essential oils to the vinegar. These essential oils should be acid-free and non-alcoholic as the white vinegar already contains alcohol. It is not recommended to mix any other solution that contains some amount of acidity in it along with vinegar.
These are some of the steps you need to follow to clean the tiled surfaces using vinegar and baking soda. There are reasons why this combination works well and it is very relevant from the details mentioned. You need not purchase very expensive household cleaning equipment to remove some of the toughest stains. The solution to the biggest and hardest stains might be lying around on your kitchen shelves like vinegar and baking soda.
Steps to clean tiled surfaces using Vinegar, Dish soap, and baking soda
The vinegar and dish soap combination would work only if the tile surfaces are not too stained. In case you find the tiled surfaces stained to a great extent, then you need to add a scrubbing agent like baking soda alongside white vinegar and dish soap. Vinegar has the natural tendency to remove the grease from the tile and the dish soap increases the surface tension of the stain so that it gets easier to remove in the case when the stain has stuck very hard and gets very tough to remove. You need a scrubbing agent like baking soda, which in turn works well along with dish soap to remove the stain.
What are the things needed for the vinegar, dish soap, and baking soda combination?
These are the following things you will need to clean the tiled surfaces using vinegar, dish soap, and baking soda combination.
- A water bucket that can carry 5 gallons of water
- Spray bottle
- Baking soda
- Dish Spoon
- White vinegar
- Take a bowl
- You need to add two cups of water 1.5 cups of baking soda, 1/3 cup of dish soap, and 1/3 cup of vinegar.
- Take a spoon and gently stir all of the added ingredients. Make sure that there are no tiny lumps formed in the mixture. You can add this mixture to a spray bottle.
- Spray the mixture from the spray bottle onto the stained surface. The coating should be even all over the stained surface.
- Firstly, take a mop and clean the sprayed area. Instead of spraying all together at once, it is better to spray in section and also mop immediately.
- After repeating the process, you need to rinse the entire surface cleanly with water. This is a very important step because of the addition of baking soda. It works very well as a scrubbing agent, but it could leave scratch-like marks on the tiles.
- If it is possible, better to rinse twice. Also, it is recommended to rinse the floor twice to ensure that there is no residue of baking soda.
- To remove the extremely tough stains you could spray some of the mixtures from the spray bottle onto the stained surface using an old soft-bristled brush and then scrub it over the entire surface.
Using vinegar and water alone
You could use vinegar and water alone to clean the stain surfaces if there is a huge spill all over the floor and the stain is not too heavy. Baking soda is used only when the stains are very heavy.
What are the things you will need for the vinegar and water combination?
These are the following things you would need for the vinegar water combination to clean the stained surfaces on the floor.
- A bucket that can carry five gallons of water
- White vinegar
- Take the bucket and fill it with two gallons of warm water.
- Take a cup of white vinegar and add it to the bucket of water.
- Take a mop immerses it into the bucket and then clean the entire stained surface
This method could be used to clean your home regularly as well apart from cleaning the floor only do if it is highly stained.
If you wish to get a very clean surface, make sure that you remove the entire debris on the floor by using a broom or vacuum cleaner. Also, the cleaning of the floor using a broom or vacuum makes the scrubbing using vinegar and baking soda combination a much easier process. These are some of the ways by which you could clean the tiled surfaces using vinegar and baking soda. Only the white vinegar would work well for the cleaning process. You cannot expect the other type of vegetable-based vinegar to work as well as the white vinegar.
There are a lot of people who have felt that excessive usage of chemical-based cleaners reduces the longevity of the tiled surfaces. Vinegar does no damage to the porcelain tiles when you use it in the right combination. Also, it is very safe, eco-friendly, and natural, just that you need to be aware of the instructions to follow to clean the tiled and stained surfaces using vinegar combination.